KT CR multi | KT CR special | Multi-hole / special cable grommets
for the use in cleanrooms, 1 - 8 mm / IP54 / UL Type 12
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
Part No.
41253.600
Specifications
Flame class
UL94-V0, self-extinguishing
Properties
halogen free, silicone free
Min. operating temperature
-40 C°
Max. operating temperature
100 C°
Advantages and benefits
Enable routing of pre-terminated cables through cable entry frames and split cable glands
Available for a large range of cable diameters
Greatly increased cable density when using double or quadruple grommets
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
